Janome Cloth Setter

How to use the Janome Cloth Setter!
The first step is to sew out a test pattern. This picture shows the test pattern on the Memory Craft 10000.

Here we are using the 5700 to sew out the test pattern!

Remove the hoop from the machine with the fabric still in the hoop and clamp the hoop to the cloth setter!

Use the screws on the cloth setter to align the red cross to the test pattern and then tighten the screws to make the adjustment permanent. You will need to check your cloth setter adjustment every time you start a new project.

Next use your template print out you made in the Customizer Easy edit to mark your fabric.

Next place the hoop in the cloth setter and start with the marking #1. Align the marks using the cloth setter and make sure the direction of the marking follows the arrow on the cloth setter.

Un clip and transfer the fabric and hoop to the machine and clip in place. Indicate pattern #1 in your machine and sew it out.

	Jenny's Sewing Studio 1030 South Schumaker Salisbury, MD 21804		(410) 543-1212 (800) 707-6007
		jenny@jennys-sewing-studio.com

Janome Cloth Setter

Jenny's Sewing Studio